This system is provided for the interaction between the OS and the hardware. If a single one crashes, the corresponding piece of hardware will no longer interact with Windows. If you face connectivity troubles, you will most likely run a network card diagnostic program. If it detects a bug but fails to correct it by itself, you may get an error report – Windows was unable to identify the hardware driver for your AC adapter. So, here’s an article for you if you’re experiencing such difficulties. So, the first step users should take is next.

Reconnect the router.

Reloading an appliance is a common method of handling web connectivity problems in Windows. It establishes an updated link to the ISP and reconnects it to its original default settings. To accomplish this, follow these instructions:

Disconnect your router, temporarily unplug it, and connect it again to the network. Next, push the reset button on the router with a paper clip for a few seconds.

Turn on alternative Windows troubleshooting tools.

Here are some other troubleshooting tools that may be useful when repairing online connectivity. It also may be useful for troubleshooting equipment and device issues to correct connected device bugs. Here’s the way to access these Windows 10 troubleshooting tools.

Enter Cortana via the windows keystroke + Q shortcut. Input “troubleshooting” in the finder box. Choose “Troubleshooting” to be able to enter the Settings app. Tap “Internet Connectivity” and press ” Start Troubleshooter” to bring up the screen. Tap the ” System Troubleshooter” button at the bottom to open another Troubleshooter.

To access additional tools, tap the “Hardware and Devices” button to see the other available repair tool. Next, select the ” Launch Troubleshooter” button to display the screen.

Repair the driver

Reload the web host adapter driver using the instructions this instruction. Begin by hitting the “Windows” + “R” key combination. Input special code devmgmt. msc in the “Start” field and press OK to bring up the screen. Double-click the NIC category to extend it. Afterward, choose the interface adapter by tapping it and then choose ” Delete Device”. In the displayed dialog window, pick the ” Remove” option, which will pop up as a confirmation. When done, tick the Scan for hardware modifications checkbox to drop the default driver.

Verify the power management settings.

To verify this option for the AC adapter, entrance to the Product Manager interface. Unfold the NIC list category in the System Manager window. To open the pull-down menu, press on the power adapter and choose Manage Network Adapter Properties. Eventually, tap the “Power Management” tab in that box.

Deselect the “Allow the computer to switch off this device to conserve energy” checkbox, if it is activated.